Model X3C09P1-03S
Rev B
Peak Power Handling
High-Pot testing of these couplers during the qualification procedure resulted in a minimum breakdown voltage of
1.46Kv (minimum recorded value). This voltage level corresponds to a breakdown resistance capable of handling at
least 12dB peaks over average power levels, for very short durations. The breakdown location consistently occurred
across the air interface at the coupler contact pads (see illustration below). The breakdown levels at these points will
be affected by any contamination in the gap area around these pads. These areas must be kept clean for optimum
performance. It is recommended that the user test for voltage breakdown under the maximum operating conditions
and over worst case modulation induced power peaking. This evaluation should also include extreme environmental
conditions (such as high humidity).
Orientation Marker
A printed circular feature appears on the top surface of the coupler to designate Pin 1. This orientation marker is not
intended to limit the use of the symmetry that these couplers exhibit but rather to facilitate consistent placement of
these parts into the tape and reel package. This ensures that the components are always delivered with the same
orientation. Refer to the table on page 2 of the data sheet for allowable pin configurations.
Test Plan
Xinger III couplers are manufactured in large panels and then separated. All parts are RF small signal tested and DC
tested for shorts/opens at room temperature in the fixture described above . (See “Qualification Flow Chart” section
for details on the accelerated life test procedures.)
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
相关PDF资料
X3C09P2-03S COUPLER 90DEG 800-1000MHZ 3DB
X3C09P2-30S COUPLER 90DEG 800-1000MHZ 30DB
X3C19E2-20S COUPLER 90DEG 1700-2000MHZ 20DB
X3C19P1-03S COUPLER 90DEG 1700-2000MHZ 3DB
X3C19P2-03S COUPLER 90DEG 1700-2000MHZ 3DB
X3C19P2-30S COUPLER 90DEG 1700-2000MHZ 30DB
X3C21P1-03S COUPLER 90DEG 2000-2300MHZ 3DB
X3C21P2-03S COUPLER 90DEG 2000-2300MHZ 3DB
相关代理商/技术参数
X3C09P1-03S-CT 制造商:Anaren Microwave 功能描述:RF HYBRID COUPLER
X3C09P1-03SR 制造商:Anaren Microwave 功能描述:HYBRID COUPLER 3DB 90 DEGREE 800-1000MHZ
X3C09P1-03S-R 制造商:Anaren Microwave 功能描述:RF HYBRID COUPLER
X3C09P1-05S 制造商:Anaren Microwave 功能描述:DIRECTIONAL COUPLER
X3C09P1-05S-CT 制造商:Anaren Microwave 功能描述:RF DIRECTIONAL COUPLER
X3C09P1-05S-R 制造商:Anaren Microwave 功能描述:RF DIRECTIONAL COUPLER
X3C09P2-03S 功能描述:信号调节 800-1000MHz IL:.20dB VSWR:1.15 -55 to 95C RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel
X3C09P2-03S-CT 制造商:Anaren Microwave 功能描述:RF HYBRID COUPLER